MK-220
|
|
 |
Providing the same design of the ÌK-219 and the ÌK-319, the condenser multidiagrammatic microphone ÌK-220 has two active membranes and the electric circuit of their switching, that allows to receive
omni, cardioid and eight polar patterns.
Magnetic reed switching is provided for the selector of the polar pattern, the 10dB pad and low pass filter switches ensuring long term reliability.
The MK-220 is recommended for vocal, acoustic guitars and woodwinds instruments recording and for sound reinforcement. Due to the wide functionalities the ÌK-220 is the ideal decision for home and professional recording studious.
Textured black finish. Factory-matched stereo pairs are available.
It is recommended to use the shock mounts AM-50, AM-60/27 "Spider"
Requirements to acoustic parameters for stereo pairs:
- Their sensitivity at the frequency of 1000 Hz may vary no more than 2dB
- The difference between sensitivity at the frequency range must be no more than 3dB
|
|
|
|
Technical data |
| Polar
pattern |
cardioid, "eight",
omni |
| Frequency response, Hz |
20 - 20000 |
| Free field sensitivity at the frequency of 1000 Hz, mV/PA , no less than |
6 (cardioid polar pattern) |
| Power |
48±2V (phantom only) |
| Output impedance at the frequency of 1000 Hz, Îhm, no more than |
200±50 |
| Recommended Load, Îhm, no less than |
1000 |
| The level of the equivalent sound pressure caused by the microphone's own noise, dB-A, no more than |
18 |
| Connector |
XLR-3 |
| Temperature range, °Ñ |
+5/+35 |
| Dimensions of, mm |
Æ52x235 |
| Weight, kg |
0,45 |
